neo

3

Featured Neostein Accessories

 

Support products and accessories for enhanced audio, installation time and surface finish.

SilentMount

Anti-vibration pre-installation bracket

FireMount

Fire-safe Mounting Bracket

Tx

Commercial 100V/70V line transformer

cS6 Flush Trim

Plaster up-to flush trim for cS6 port

SilentMount,
pre-install 

Providing a pre-install bracket that not only acts as a space-saver but also ensures a clean and precise speaker hole every time. With constraining layer damping, SilentMount also helps to reduce vibration-born transmission of sound into the structure of the building.
Designed for 16″ (400mm) stud spacing, SilentMount3 and SilentMount5 are 12.5mm (1/2″) thick with a straight edge, allowing them to be boarded up-to, taped and joined as with regular wall/ceiling board and plastered over giving a great finish every time.

Info

easy install, vibration-reduction mount
Attached to the stud frame during first fix as a space-saver, SilentMount gives the drywallers a fixed edge to board up. Once the ceiling or wall is boarded, simply attach the speaker to the cable and screw it directly into the SilentMount board.
A flush-install bracket for 12.5mm (1/2″) board installations, with vibration reduction membrane technology. Coated to ensure strong plaster adhesion.

Spec

size
600mm (231/2“) tall
403mm (157/8“) wide
12.5mm (1/2“) thick
material
plywood with laminated damping layer
stud spacing
400mm/16″ (on-center)
damping Layer
butyl rubber
hole size
304mm x 204mm (SilentMount3)
454mm x 254mm (SilentMount5)

Options

for every speaker
SilentMount3 for use with Neo3 Invisible Loudspeaker
SilentMount5 for use with Neo5 Invisible Loudspeaker

FireMount,
pre-install 

Providing a pre-install bracket with all the benefits of the SilentMount, but with an additional fire-safe metal back. With constraining layer damping and intumescent backbox, FireMount helps to meet fire regulations while delivering great sound.
Designed for 16″ (400mm) stud spacing, FireMount3 and FireMount5 are 12.5mm (1/2″) thick with a straight edge, allowing them to be boarded up-to, taped and joined as with regular wall/ceiling board and plastered over giving a great finish every time.

Info

easy install, fire-safe mount
Attached to the stud frame during first fix as a space-saver, FireMount gives the drywallers a fixed edge to board up. Once the ceiling or wall is boarded, simply attach the speaker to the cable and screw it directly into the FireMount board. Once the speaker is installed, plastered and decorated, the speaker will give a fire safe rating of 60 minutes.
A flush-install bracket for 12.5mm (1/2″) board installations, with and intumescent backbox and vibration reduction membrane technology. Coated to ensure strong plaster adhesion.

Spec

size
600mm (231/2“) tall
403mm (157/8“) wide
12.5mm (1/2“) thick
material
fire-safe plywood with laminated damping layer, steel back with intumescent coating
Stud Spacing
400mm/16″ (on-center)
damping Layer
butyl rubber
hole size
304mm x 204mm (FireMount3)
454mm x 254mm (FireMount5)

Options

for every speaker
FireMount3 for use with Neo3 Invisible Loudspeaker
FireMount5 for use with Neo5 Invisible Loudspeaker

Tx,
commercial transformer 

A transformer for commercial installations of high impedance/100V/70V line loudspeaker systems. Install high numbers of loudspeakers from a single cable line and amplifier channel.
Designed for use with 100V/70V commercial amplifiers. Note: take extra care when testing commercial loudspeaker systems for rattles and buzzes during installation as loudspeakers cannot be tested individually in-situ.

Info

high-impedance, high-quality
Allowing large numbers of Neostein invisible loudspeakers to be installed on a single line, Tx works with 100V and 70V line systems.
Installed in-line immediately before the loudspeaker, Tx is installed within the ceiling cavity, screwing directly to the studwork to hold it firmly in place. A single transformer should be used with each speaker.

Spec

size
more information coming soon…
tappings 100V
more information coming soon…
tappings 70V
more information coming soon…
installation
screwed directly to the studwork in close proximity to the loudspeaker.

Options

for every speaker
more information coming soon…

cS6 port trim,
plaster-up-to flush-mount port 

A flush-mount plaster-up-to grille for use with the cS6 subwoofer. Once installed and plastered-in, a flush magnetic grille is placed into the opening to help the port opening blend seamlessly into the room. Supplied with a white grille.
Installed once the subwoofer has been fitted and wall/ceiling board has been hung (exposing the port tube), the cS6 flush mount trim attaches to the plasterboard (slipping over the pre-installed port tube) and gives a plaster bead for a clean sharp plaster edge.

Info

flush-mount, magnetically secured
Providing a bead for a 3mm coating of plaster/finishing compound, the cS6 flush-mount port trim ensures a perfectly clean opening for the flush-mount grille.
Help to further hide an already near-invisible subwoofer with a seamless port opening.

Spec

size
more information coming soon…
installation
installed prior to plaster work, the port trim gives a 3mm plaster bead.
grille finish
white
cutout hole size
more information coming soon…

Options

for every room
flush mount grille provided in white

For exceptional installations

Menu

Neostein uses first or third-party tools that store small files (cookies) on your device. Cookies are normally used to allow the site to run properly (technical cookies), to generate navigation usage reports (statistics cookies) and to suitable advertise our services/products (profiling cookies). We can directly use technical cookies, but you have the right to choose whether or not to enable statistical and profiling cookies. Enabling these cookies, you help us to offer you a better experience.